These are the largest spreaders currently manufactured by Wallaby Fabrication. Most of those so far produced are working spreading feedlot manure.

They have the same features as a 10CM and come in two basic configurations:

LONG & LOW

SHORT & HIGH

As standard they are fitted with semi trailer type tandem axles with eight used, but sound 11r22.5 tubeless tyres.

There have been two machines produced with very large wheels. This necessitates the use of a steering, rocking front axle and adds considerably to the cost. The advantage is that ground pressure may be slightly reduced and ground damage due to tyres "screwing" is eliminated, but as the tractor doesn't share some of the machine's weight there could be a reduction in traction.

Another option is a longitudinal spiral conveyor mounted well above the floor conveyor to break up unusually difficult materials. This has only been found necessary once. And that was by a contractor who has no control over the condition of the material he is called upon to spread. An individual feedlot would be able to wait until the moisture content was at a suitable level.

WALLABY FABRICATION PTY LTD

1800 306 308

Spread Your Dollar Further